Netwatch Dual-WAN Failover & Telegram Alert Studio

# ==================================================================
# ISP SECTOR - MikroTik RouterOS v7 Netwatch Dual-WAN Failover
# Primary WAN: 192.168.1.1 (Check: 8.8.8.8)
# Secondary WAN: 192.168.2.1 (Check: 1.1.1.1)
# Generated at: 2026-09-12 03:45:47
# ==================================================================

# 1. Recursive Default Routes Setup
/ip route
add dst-address=0.0.0.0/0 gateway=8.8.8.8 distance=1 check-gateway=ping comment="Primary WAN via Host1"
add dst-address=0.0.0.0/0 gateway=1.1.1.1 distance=2 check-gateway=ping comment="Secondary WAN via Host2"
add dst-address=8.8.8.8/32 gateway=192.168.1.1 scope=10 comment="Host1 Pin to WAN1 Gateway"
add dst-address=1.1.1.1/32 gateway=192.168.2.1 scope=10 comment="Host2 Pin to WAN2 Gateway"

# 2. Netwatch Auto-Failover Monitor & Alerts
/tool netwatch
add host=8.8.8.8 interval=5s timeout=1000ms type=icmp \
    down-script="/log error \"Primary WAN1 Down! Switched to Backup WAN2\";" \
    up-script="/log warning \"Primary WAN1 is UP! Traffic Restored.\";" comment="WAN1 Monitor"

# ==================================================================
# Paste directly into MikroTik WinBox Terminal
# ==================================================================