VSOL EPON OLT Configuration CLI Mode Step by Step Guide

🔹 Step 1: OLT Access
When a network device needs configuration, first we must login to it. Today we will configure VSOL EPON OLT completely via AUX port.

Accessing OLT by AUX Port:

• Use an Ethernet cable (RJ45) to connect your PC to the OLT AUX port.

• Default AUX IP of VSOL EPON OLT: 192.168.8.100

• Subnet Mask: 255.255.255.0

• Set your PC IP in the same subnet, e.g., 192.168.8.101.

Now we can access the OLT via:

• Telnet: 192.168.8.100

• Web management: https://192.168.8.100

Default Login Info:

🔹 Step 2: Uplink with VLAN Configuration

We have 4 PON ports, each with different VLANs.
Our uplink port is G1. First, create VLANs:

• VLAN 400 → OLT management (remote access)

• VLAN 401–404 → PON ports

Configure uplink (G1) as trunk:

Check MAC address table:

🔹 Step 3: Assign IP Address

Assign IP for OLT remote management (VLAN 400):

🔹 Step 4: PON Port Configuration

We have 4 PON ports and 4 VLANs (401–404). Assign VLANs to each PON port:

PON 1:

PON 2:

PON 3:

PON 4:

🔹 Conclusion

So friends, today we successfully configured VSOL EPON OLT step by step.
You can now manage your OLT via web or telnet.

If anyone has difficulty understanding, comment below. I will support you.